Auxiliary Equipment for Plastic Bottle Molding Projects
Auxiliary equipment must be sized as part of the machine, mould, resin and utility system. LIANXIN catalogue materials list seven supporting equipment categories; the final make, model, capacity and interface are confirmed for the project.
Catalogue-listed auxiliary categories
| Equipment | Project function | Information needed for sizing |
|---|---|---|
| Auto loader | Transfers resin to the processing system | Resin, conveying distance, consumption and layout |
| Doser | Controls additive or color dosing | Base resin, additive ratio, throughput and accuracy requirement |
| Crusher | Handles approved production scrap for a defined recovery route | Material, part size, recovery policy and required throughput |
| Chiller | Supplies process cooling water | Machine, mould, ambient conditions, inlet/outlet temperatures and flow |
| Air compressor | Supplies process and blow air | Required pressure, flow, duty cycle, air quality and local standard |
| Mould temperature controller | Controls mould temperature | Resin, mould circuit, temperature range and heat load |
| Three-in-one dehumidifying dryer | Dries and conveys moisture-sensitive material | Resin grade, moisture target, throughput and site conditions |
Why auxiliaries are selected with the machine
An undersized utility can limit cycle stability; an oversized or mismatched unit can add cost without improving bottle acceptance. Final selection therefore uses the machine model, bottle, mould, resin, cycle target, ambient conditions and available site utilities.
Information to provide
- Selected or candidate LIANXIN machine model
- Bottle, resin and cavity plan
- Target output and operating hours
- Site voltage, frequency, cooling-water and compressed-air conditions
- Conveying distance, ambient temperature and humidity
- Required spare capacity, interface standard and acceptance method
This page identifies equipment categories only. It does not claim an unverified auxiliary model, capacity or brand. Review matched moulds, all products or send the utility schedule.