IBM-50E All-Electric Servo Injection Blow Molding Machine
The LIANXIN IBM-50E is a all-electric servo injection blow molding machine for all-electric injection blow molding projects requiring a 300 cm³ catalogue injection volume and up to 120 mm product diameter. Model selection must be confirmed from the bottle, resin, mould, cavities, target output and site utilities—not from model name alone.
Catalogue reference specifications
| Parameter | Catalogue reference |
|---|---|
| Screw diameter | 50 mm |
| Screw L/D | 20 |
| Maximum injection volume | 300 cm³ |
| HDPE reference injection capacity | 220 g |
| Injection pressure | 1000 bar |
| Injection clamping force | 600 kN |
| Blow clamping force | 100 kN |
| Catalogue product-volume range | 0.015–1 L |
| Maximum product height | 240 mm |
| Maximum product diameter | 120 mm |
| Dry cycle reference | 2.8 s |
| Machine dimensions | 4.5 × 2.2 × 2.15 m |
| Machine weight | 6.5 t |
These figures are catalogue references, not a guaranteed production output. Final values and acceptance criteria belong in the controlled project specification.
Where IBM-50E fits in the series
A middle IBM-E platform for projects that need more mould and shot capacity than IBM-30E without moving directly to IBM-80E.
Use the IBM-E family comparison to compare all published models before confirming a machine.
Materials and bottle review
Catalogue project materials for this family may include HDPE, LDPE, PE, PP, PS and EVA. Suitability depends on the approved resin grade, bottle geometry, neck finish, wall distribution, mould, cycle and required inspection. A published volume range does not confirm every bottle shape within that range.
Certification and evidence boundary
No CE scope is claimed for this model from another LIANXIN model or family. Request controlled compliance documents for the exact project configuration.
Information LIANXIN needs before configuration
- Bottle drawing or physical sample
- Approved resin grade
- Bottle volume, weight, height, diameter and neck finish
- Cavity plan and target output
- Appearance, wall-distribution, leak and closure criteria
- Site voltage, cooling water, compressed air and available space
- Required inspection, documentation and market qualification
Questions about IBM-50E
What bottle size can IBM-50E make?
The catalogue reference is 0.015–1 L, with a maximum product height of 240 mm and maximum product diameter of 120 mm. The actual bottle must be reviewed with its resin and mould.
Does the catalogue dry-cycle or capacity value guarantee output?
No. Output depends on bottle weight and geometry, resin, cavities, cooling, utilities, mould design, settings and acceptance criteria. A guaranteed output requires an agreed bottle trial and written acceptance method.
What should be compared before moving to another model?
Compare injection volume, reference injection capacity, clamping force, product envelope, mould arrangement, machine footprint and utilities—not bottle volume alone.
Review IBM-E machines, compare IBM-H and IBM-E or send a bottle drawing.