IBM-E All-Electric Injection Blow Molding Machines
The LIANXIN IBM-E series uses a full electric servo system for injection blow molding projects that need coordinated motion control and repeatable forming.
Catalogue models and specifications
| Parameter | IBM-30E | IBM-50E | IBM-80E | IBM-135E |
|---|---:|---:|---:|---:|
| Screw diameter | 40 mm | 50 mm | 60 mm | 70 mm |
| Screw L/D | 21 | 20 | 21 | 21 |
| Maximum injection volume | 201 cm³ | 300 cm³ | 680 cm³ | 960 cm³ |
| HDPE injection capacity | 151 g | 220 g | 510 g | 672 g |
| Injection pressure | 1000 bar | 1000 bar | 1000 bar | 1250 bar |
| Injection clamping force | 300 kN | 600 kN | 1000 kN | 1500 kN |
| Blow clamping force | 80 kN | 100 kN | 150 kN | 250 kN |
| Product volume | 0.015–1 L | 0.015–1 L | 0.005–1 L | 0.015–1.5 L |
| Maximum product height | 200 mm | 240 mm | 240 mm | 240 mm |
| Maximum product diameter | 90 mm | 120 mm | 120 mm | 120 mm |
| Dry cycle | 2.5 s | 2.8 s | 3.2 s | 4 s |
| Machine dimensions | 3.05 × 1.3 × 2.15 m | 4.5 × 2.2 × 2.15 m | 5.95 × 2.45 × 2.3 m | 3.85 × 2.7 × 7.5 m |
| Machine weight | 4.5 t | 6.5 t | 9.5 t | 20 t |
These are customer-catalogue reference values, including the published IBM-135E dimensions. Final confirmation remains subject to the controlled project specification. IBM-E projects may use HDPE, LDPE, PE, PP, PS or EVA when the selected resin grade, bottle and process have been verified together.
Energy statement
LIANXIN source materials indicate energy savings of up to about 70% compared with conventional configurations under matched project conditions. Actual energy use varies with the bottle, resin, cycle, machine loading, utilities, settings and maintenance. A guaranteed consumption value, if required, must be defined in the signed project specification and acceptance method.
Project selection
- Bottle volume, weight and dimensions
- Neck finish and closure interface
- Approved resin
- Cavity count and target output
- Wall distribution and appearance
- Site power, cooling and compressed air
- Agreed bottle and machine acceptance criteria
IBM-E may be evaluated for pharmaceutical packaging, cosmetic packaging, food and dairy packaging and chemical or household packaging.
No certification scope should be inferred from another machine family. Request controlled technical and compliance documents for the exact model under consideration.
Compare IBM-H, review mould matching or send a bottle drawing.